How To Install Window Blinds In Minneapolis

Many Minneapolis homeowners turn to window blinds when they need more privacy and governance over daylight in their properties. They’re a functional and economical window treatment. They also require just a handful of steps to place for experienced do-it-yourselfers. But, nothing beats the ease of working with a qualified window treatment installer. Here are the basics of hanging window blinds and when to call the experts to do it for you.

Take Precise Measurements

Prior to beginning, decide if you should get inside-mount or outside-mount blinds. This critical detail will tell you where to measure. Take measurements of the height, depth, and width within your window frame for inside-mount blinds. For outside-mount blinds, measure the width and height of your window, which includes the trim, and then extend your measurements by three inches to ensure good coverage. Measure with precision–avoid rounding up or down. Poorly fitting blinds won’t work correctly.

Choose Your Blinds

After you know your measurements, you are ready to choose your blinds. You probably know what style of blinds you would like. Pick blinds that coincide with your measurements as closely as possible. Off-the-rack blinds often won’t fit exactly, either jutting out too much or not getting to the window edge entirely. Ensure you have equipment that allow you to attach the blinds at the proper depth, also. You’ll need to go with specially made blinds and hardware for a superior fit.

Install Your Window Blinds

Your blinds may come with instructions. Use them to attach your exact product. If you want a preview of how challenging it is to install window blinds in Minneapolis, here is a summary of basic steps to offer a better understanding.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the window’s frame about an inch from the side. Make sure this spot won’t hinder the blind’s operation. Outline the bracket holes using a pencil.
2. Drill pilot holes on your marks.
3. Situate the bracket over your holes and secure with screws.
4. Duplicate these opening three steps for the second bracket.
5. Place the end caps onto the top rail of your blinds. Slide the rail into the brackets.

Attach the tilt wand and check it. In addition, test the pull cord.

Outside Mount Blinds

1. Determine if you’re installing on the wall above the window or the window trim. Hold the headrail in place and make certain the blind reaches the bottom edge of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from each headrail mark and mark here for the screws.
4. Drill pilot holes in the proper spots.
5. Situate the brackets with your wall holes and attach with screws.
6. Position the blind rail into the brackets.

Connect the tilt wand and test to ensure everything works.

Opt For The Easiest Way To Install Blinds 

Just a reminder, you don’t have to install blinds by yourself. The simplest way to install window blinds in Minneapolis is to seek out a professional window treatment installer. They will assist you every step of the way. They’ll help you find blinds that accommodate your needs, make accurate measurements for a custom product, and attach them for you. They support customers each day, so they’ll complete your project quickly and correctly. They’ll be able to diagnose any issues without wasting hours trying to find help on the Internet. A window treatment expert will also have better-quality blinds than large retail outlets or online marketplaces.

Avoid The Hassle And Have Sunburst Shutters Install Your Window Blinds In Minneapolis

Installing window blinds in Minneapolis couldn’t be easier when you work with Sunburst Shutters Minneapolis. We’ll help you choose custom blinds that will suit your windows precisely, and our skilled installation crew will attach them for you. All you must do is call 952-856-8130 or fill out the form below to arrange a complimentary in-home consultation.